pete north
New Member
- Posts
- 109
ok guys,
here is the problem i was doing a good deed, was out for a drive. I rounded the bend to find and old lady in a fiesta in a ditch. so i stoped and helped her out of the car. put the Hazard lights on and and sat her in the cab till the cops came. but when sitting there the hazard lights stopped working and so did the indicators. i checked the fueses and there was a 30amp one blowen replaced that and the hazard light switch. No this is where the issues start. the switch had the multi plug connected but the are 2 spade connectors at the side of the switch and there was nothing connected to them. but there is 4 female connectors that will fit. i dont know what ones to use. they were not connected before so i'm sure that is not the problem. has anyone got any ideas
here is the problem i was doing a good deed, was out for a drive. I rounded the bend to find and old lady in a fiesta in a ditch. so i stoped and helped her out of the car. put the Hazard lights on and and sat her in the cab till the cops came. but when sitting there the hazard lights stopped working and so did the indicators. i checked the fueses and there was a 30amp one blowen replaced that and the hazard light switch. No this is where the issues start. the switch had the multi plug connected but the are 2 spade connectors at the side of the switch and there was nothing connected to them. but there is 4 female connectors that will fit. i dont know what ones to use. they were not connected before so i'm sure that is not the problem. has anyone got any ideas