P38A Blend motors

hi
My right side heating has stopped working I have put nanocom on and no faults show so have forced the heating to both sides and it works return control to ECU left works right doesn't has anybody got any ideas before I strip out the blend motor to change it many thanks

Seems like blend motor works as used with Nanocom....problem probably exists in the HeVAC unit itself....

Thanks for that I will look into it and let you know what I find I didn't think it was the blend motor as I had no book sign

If Nanocom can drive the blend & distribution motors to direct air & control heat, etc. and you get no faults, . . . . then suspect switches on HEVAC front panel rather than the ECU inside. Otherwise it would probably indicate a fault with the handbook symbol. . . . . but that my opinion rather than fact.

Did you try calibrate option in Nanocom ?

Pete

That's what I thought Pete no open cheque book symbol on screen and everything works I did calibration twice now still no heat on drivers side will have to see what readings I get when putting the panel through its paces

Nanocom menu should allow you to check all the button responses.