bleeding clutch issues

hi all
looking for some help?????
just rebuilt a 90 using td5 bulkhead and
master cylinder
tried bleeding but just dont seem to get the pressure
down at slave i know it worked well before i
took all out ???
regards
mike

When you're bleeding it does the pedal just go down and stay down? And you have to take it back up yourself? Or...?

JUGG said:

When you're bleeding it does the pedal just go down and stay down? And you have to take it back up yourself? Or...?

Click to expand...

yes pedal stay down
even after presure bled with expensive machine

i took the slave off mole griped a spanner over the end of the slave
then bled put back together again
still the same
about half inch of pressure no good at all i have to lift pedal up
???????
regards
mike

have you checked adjuster nuts in the pedal box ,failing that you will need new m/c they dont allways like been empty and refilled and then pumped to bleed

jamesmartin said:

have you checked adjuster nuts in the pedal box ,failing that you will need new m/c they dont allways like been empty and refilled and then pumped to bleed

Click to expand...

well well james m
thank you for your imput

the adjuster bolts had loosened right off

now sorted
cheers
mike