best clutch kit? borg % beck or LUK?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

spannerspencer

New Member
Posts
28
im leaning towards thinking my slave cylinder may be worn. if so, ill change the clutch. whats the best kit to go for? I was thinking of borg & beck or Luk.

regards

spence
 
I seem to remember reading the b+b connections arnt the best and leak around the slave. It's a job you only want to do once.
 
Fck Borg and Beck. Fck them in the eyes.

I fully expect aftermarket parts to be of slightly inferior quality compared to original branded parts, but I also expect them to DO THE MOTHERFKING JOB THEY ARE DESIGNED TO DO. That includes fitting properly and not leaking - which it seems is a little beyond Borg and Becks quality control department. Im not the only one with the same problem either.
 
dave21478 said:
Fck Borg and Beck. Fck them in the eyes.

I fully expect aftermarket parts to be of slightly inferior quality compared to original branded parts, but I also expect them to DO THE MOTHERFKING JOB THEY ARE DESIGNED TO DO. That includes fitting properly and not leaking - which it seems is a little beyond Borg and Becks quality control department. Im not the only one with the same problem either.
Click to expand...

So that's a "No" to Borg and Beck then? :rolleyes:
 
I recently did a clutch on my TD4, fitted LuK dual mass flywheel, clutch and concentric release bearing. Had no problems and works like a charm. LuK is what is fitted to the TD4 by the manufacturer, so that's what I went with.

I've also fitted LuK to more TD4 freelanders at work with no issues over the last few years with no issues as well, so definitely recommend them.
 
Agreed use anything other than B&b, The ones I have had recently had been produced years ago and had absorbed moisture rendering them useless. Whilst the system can be bled it's really designed to not be and a good kit should not need it. Get both parts master and slave :)
 
You must log in or register to reply here.

Similar threads

H
Freelander 1 which clutch kit to choose ? borg beck, britPart or quinton hazell ?
Replies
5
Views
506
Nodge68
Nodge68
D
Freelander 1 FL1 td4 clutch pedal dropped to floor - master or slave
Replies
4
Views
1K
Disco Magic
D
G
Series 2 2A Diesel busted clutch plate
Replies
2
Views
322
grewth
G
V
Freelander 1 Td4 2005 clutch M47 engine 109 Hp
Replies
2
Views
643
VisitingAlien
V
F
Freelander 1 Clutch Pressure
Replies
12
Views
1K
Alteredtech
Alteredtech
Back
Top