stuu
Well-Known Member
- Posts
- 1,988
- Location
- Aberdeenshire
Cruise control started working at same time i did that wire with switch pack too haha affa random this beast lol
becm
- Thread starter stuu
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
RAVES really a lap top thing it a pretty big file.. Saying that i think some have manged to download it to mobiles but its not as good as on a laptop...Imo that is.
stuu
Well-Known Member
- Posts
- 1,988
- Location
- Aberdeenshire
Downloaded it on my phone but its not 100% will just connect my fone to laptop and transfer it across
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 20,080
- Location
- Buckinghamshire, UK. ('95 DT)
I only managed to open the RAVE PDFs individually on my phone. Seeing as the names are pretty meaningless I just deleted it again.
I'm sure someone on here posted some software to link them all together but I read the first 2 lines and then lost the will to live.
I'm sure someone on here posted some software to link them all together but I read the first 2 lines and then lost the will to live.
stuu
Well-Known Member
- Posts
- 1,988
- Location
- Aberdeenshire
I found the range rover individual pdf had a look could use it but closed it 2am i was tired haha be ####ed if i know how im gunna find it again in all the files haha
stuu
Well-Known Member
- Posts
- 1,988
- Location
- Aberdeenshire
Bringing up an old thread here. Iv undone what the sparky put in. Washers dont work on normal button. I have found the maxi fuses under bonnet Are smelly and brown burn marks on them. Do they power bcem? Is the bcem controlled in 'parts'. Nothing on any relays They Look okay.
Could under bonnet fuse box cause the fuse 10 failed message? And also washer commands to not work? (Wipers work ok) and random book sign on hevac display?
If fuse box is failing. Can it be re solderd/repaired? (Brother can do for me)
Could under bonnet fuse box cause the fuse 10 failed message? And also washer commands to not work? (Wipers work ok) and random book sign on hevac display?
If fuse box is failing. Can it be re solderd/repaired? (Brother can do for me)
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 20,080
- Location
- Buckinghamshire, UK. ('95 DT)
I thought fuse 10 was under the driver's seat?
- Posts
- 16,482
t'is
stuu
Well-Known Member
- Posts
- 1,988
- Location
- Aberdeenshire
It is and theres one in there a working fuse and still get failed message lol
- Posts
- 58,170
- Location
- Preston Lancs.
Why would you need a fuse in the fuse 10 position unless you have electric seats?
stuu
Well-Known Member
- Posts
- 1,988
- Location
- Aberdeenshire
God knows wammers hoped if one was there itd stop flashin up it had failed
- Posts
- 58,170
- Location
- Preston Lancs.
If there is no circuit through it and it does not feed anything because you have not got electric seats how can it be flagged as failed? Unless you pet leccy has routed something through it.
stuu
Well-Known Member
- Posts
- 1,988
- Location
- Aberdeenshire
No undid his wiring today back to how it should be. Could them maxi fuses stop power to portions of bcem?
- Posts
- 58,170
- Location
- Preston Lancs.
Maxi fuses do power BECM. So could do. Does it have the correct fuse box fitted? Wrong one may cause a few problems.
stuu
Well-Known Member
- Posts
- 1,988
- Location
- Aberdeenshire
Erm i assum its right one. Still same one thats been in for years
- Posts
- 58,170
- Location
- Preston Lancs.
Just wondering why all the wiring changes extra fuse blocks were needed.
stuu
Well-Known Member
- Posts
- 1,988
- Location
- Aberdeenshire
I put washers back on original connections on bcem. Not working. So back on the bodge for now. one fuse is for wipers and one for dial lighting (Its been added into a sidelight circuit). Made it all easy to reconnect as it should be. smelt the engine bay box and smells. Maxi fuses dint look the best. relays are okay nick no marks on them. Fusebox failing thou. Cant really narrow out a switch or a bcem problem if it's on its way.
stuu
Well-Known Member
- Posts
- 1,988
- Location
- Aberdeenshire
Everyone rates the lad and his work. (Top lad works for stagecoach on there electronics)... id be kicking up a fuss if he had done this. No way would i let him near any Of my motors after seeing this.
- Posts
- 58,170
- Location
- Preston Lancs.
Wipers are switched by BECM sounds like that circuit has failed.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
If you change the fuse box make sure it is the correct one for your vehicle, fuel and year. Wammers listed the different part numbers not so long ago, try a search or he may be kind enough to re post them
