Becm?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DJG

DJG

New Member
Posts
55
Location
Canterbury
Hello all, haven't been on here for a while. The P38 has been sitting on the drive for some time but going to catch up on some bits that need doing between now and xmas. From generally reading the post/problems on here it seems the BECM controls or powers a lot of things. Electrics wise I currently have these problems... no central locking with fobs, no cruise control (led doesn't light up) fantom gearbox overheat warning (sometimes when sounding the horn) and I'm sure there's something else that I can't remember now. Could it be all because of a knackered BECM?
 
Generally the advice on here is don't do anything on a P38 without a 100% charged and decent battery. Does all sorts of weird things without this. Guess as it gets older it becomes more sensitive too.
 
Yeah they were born to give random fault warning under low voltage. These problems have been there since I bought the car though.
 
Ok I am going to have a good look over the fuse box but where are the managements for those features for me to check connections?
 
For a simple start, pull the kick panel off on the passenger side & check the two white connectors for corrosion. These dodgy connectors kick up gearbox & EAS faults.
If any signs or yellow powdery substance cut the connectors out & solder the wires straight through.
 
You must log in or register to reply here.

Similar threads

F
key Fob/Central locking
2
Replies
33
Views
2K
Grrrrrr
Grrrrrr
Padda.116
L322 Alarm going off won’t start
Replies
1
Views
498
Datatek
Datatek
awkwardbob
L322 2003 L322 Can’t open bonnet -battery flat
2 3
Replies
55
Views
4K
backinblack
backinblack
W
l322 td6 won’t start
Replies
10
Views
1K
woo0003
W
W
Rear DLR not working
Replies
8
Views
727
Dragonwalker
Dragonwalker
Back
Top