Bearings for vcu
- Thread starter oiley
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grayo
Active Member
- Posts
- 714
- Location
- Pontypridd, South Wales
Foundry 4x4. Make sure you ask for the GKN bearings with the FAG race.
Parts and Accessories for Landrover and 4x4
Parts and Accessories for Landrover and 4x4
NeilTD4
Active Member
- Posts
- 385
- Location
- Warwickshire
Foundry have them listed on eBay too, item number 370781431274 for the GKN ones. £90 for a pair delivered.
Grayo
Active Member
- Posts
- 714
- Location
- Pontypridd, South Wales
I can't believe how the price has shot up in 5 weeks. When I bought my GKN bearings from Foundry 4x4, they were only £36 for the pair, that was picked up mind.
paul1967
New Member
- Posts
- 29
- Location
- Northumberland
Seems like that point in time when demand is starting to climb to change VCU and/or bearings so prices shoot up and as soon as demand drops and there stock is high the prices will drop obviously watching the forums
:boom:
:boom:
NeilTD4
Active Member
- Posts
- 385
- Location
- Warwickshire
I saw them on eBay, but still rang Foundry to check the price because the last I'd heard they were £65. The guy I spoke to said he was afraid they had gone up!
Still, what I believe to be the original ones have lasted 9 years
New ones from Foundry on the way, to be fitted be fitted along with a VCU by Bell in a couple weeks
Still, what I believe to be the original ones have lasted 9 years
New ones from Foundry on the way, to be fitted be fitted along with a VCU by Bell in a couple weeks
Grayo
Active Member
- Posts
- 714
- Location
- Pontypridd, South Wales
wish I had bought two sets now at £36, could have put them in the cupboard in the garage for next time.
gareth123
Active Member
- Posts
- 217
- Location
- Languedoc, France
I saw them on eBay, but still rang Foundry to check the price because the last I'd heard they were £65. The guy I spoke to said he was afraid they had gone up!
Still, what I believe to be the original ones have lasted 9 years
New ones from Foundry on the way, to be fitted be fitted along with a VCU by Bell in a couple weeks
I got a recon VCU with new bearings from Bell for 255 pounds including postage to France less than a month ago. Maybe demand is rising and prices are going up? I fitted it all at the weekend (together with a new front diff mount) and it has made a huge difference. Car is like new.
Hippo
Lord Hippo
- Posts
- 51,885
I've got OEM bearings and brackets and want to remove them from the VCU as they're still in full working order at 3 years old. Anyone tried do this? Had a go today and I think the only option would be to cut through the VCU shaft in small amounts so as not to heat up the bearing, then knock the middle through.
- Posts
- 83,230
- Location
- Embasinga stocæ
"disassembly is the reverse of assembly"
Haynes Manwell 2003.
Haynes Manwell 2003.
If they are £90 on fleabay what are these then??
Parts & Accessories for Landrover & all 4x4: Freelander, Drive Line (General)
Parts & Accessories for Landrover & all 4x4: Freelander, Drive Line (General)
TOQ000040G | Bearing for intermediate shaft all 4cyl engines - Hardy Spicer
TOQ000040G - GKN INTERMEDIATE BEARING PROPSHAFT FREELANDER 4 CYLINDER ONLY - Freelander 1 Parts
Am I correct in the part number being TOQ000040G
is this correct for the GKN with FAG race??
denoted by the Red inserts?? not clear or blue like the cheaper ones..
TOQ000040G - GKN INTERMEDIATE BEARING PROPSHAFT FREELANDER 4 CYLINDER ONLY - Freelander 1 Parts
Am I correct in the part number being TOQ000040G
is this correct for the GKN with FAG race??
denoted by the Red inserts?? not clear or blue like the cheaper ones..
Hippo
Lord Hippo
- Posts
- 51,885
They called them replacement parts, which means they're replacements for OEM, but not OEM. I think.
Fag are normally red. When they put a G on the end they normally mean GKN, but should also reference it by the side to confirm. eg GKN logo.
P2211807 ZcUw3Lw
P2281803a zPB3fEj
Last edited:
philvy
Well-Known Member
- Posts
- 2,288
- Location
- Frankfurt, Germany
if you can press the bearings out with a hydraulic press, the bearing itself goes for 15-20 quid methinks, 1207 isnt expensive
andyfreelandy
Well-Known Member
- Posts
- 5,132
- Location
- Devon
Many of the old links to genuine prop bearings GKN made & FAG bearing are now out of date. Where is the best place to buy genuine ones without a mortgage increase?!?! Thanks
Similar threads
