sarstad
Active Member
- Posts
- 394
- Location
- Torkilstrup (Denmark)
it it posibel to put in the big BC in a range rover 2,5dse from 96
BC in 96 RR
- Thread starter sarstad
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
SpudH
Well-Known Member
- Posts
- 1,256
- Location
- County Kerry, Ireland
Whats a big BC ????
sarstad
Active Member
- Posts
- 394
- Location
- Torkilstrup (Denmark)
thows to nobs on the end of the indicator-arm
SpudH
Well-Known Member
- Posts
- 1,256
- Location
- County Kerry, Ireland
You're going to have to be a little more descriptive.
I think you're talking about buttons on the end of the indicator stalk but I wasn't aware that there were different versions of these.
Any chance of a photo?
I think you're talking about buttons on the end of the indicator stalk but I wasn't aware that there were different versions of these.
Any chance of a photo?
sarstad
Active Member
- Posts
- 394
- Location
- Torkilstrup (Denmark)
i pick up the car next week then i take a pictur
sarstad
Active Member
- Posts
- 394
- Location
- Torkilstrup (Denmark)
but you are right
sarstad
Active Member
- Posts
- 394
- Location
- Torkilstrup (Denmark)
sarstad
Active Member
- Posts
- 394
- Location
- Torkilstrup (Denmark)
SpudH
Well-Known Member
- Posts
- 1,256
- Location
- County Kerry, Ireland
Its really strange that a DSE from 96 does not have those.
But to answer your question, if you have a high line BECM then I would say it would be real easy to fit them.
To find out if you have a high line BECM just take off the plastic surround to the fuse box cover under the seat and check if there is a big H on the label of the BECM
But to answer your question, if you have a high line BECM then I would say it would be real easy to fit them.
To find out if you have a high line BECM just take off the plastic surround to the fuse box cover under the seat and check if there is a big H on the label of the BECM
jwaldron
New Member
- Posts
- 284
- Location
- YNYS MON (North Wales)
Could it be that the stalk itself currently in the car is in actual fact a replacement part and that someone has simply not fitted the correct one? If this is the case - the connections would all be in place to simply replace the item with a genuine or correct part...
sarstad
Active Member
- Posts
- 394
- Location
- Torkilstrup (Denmark)
rasheed
Well-Known Member
- Posts
- 1,815
- Location
- Bangladesh
ever heard of google translate or babelfish?
sarstad
Active Member
- Posts
- 394
- Location
- Torkilstrup (Denmark)
yes
must have been asleep when I wrote
there is nothing else that I may see whether it is the one with an H on..
what if it is not??
what if it is
sarstad
Active Member
- Posts
- 394
- Location
- Torkilstrup (Denmark)
i have the BECM with an big H on . so is it just a matter of changing the indicate arm ??
SpudH
Well-Known Member
- Posts
- 1,256
- Location
- County Kerry, Ireland
Yeah, hopefully it should just work.
There is a setting in the BECM for whether or not a Trip computer is fitted but I've never seen a High line BECM without it so it should be ok.
There is a setting in the BECM for whether or not a Trip computer is fitted but I've never seen a High line BECM without it so it should be ok.
sarstad
Active Member
- Posts
- 394
- Location
- Torkilstrup (Denmark)
if not it is just to activate in the BECM ?
SpudH
Well-Known Member
- Posts
- 1,256
- Location
- County Kerry, Ireland
Yeah, should be that simple. I would be very surprised if it didn't work as soon as you plugged it in and turn on the ignition
sarstad
Active Member
- Posts
- 394
- Location
- Torkilstrup (Denmark)
Similar threads
