battery monitor

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
52322.jpg


:p
 
Stick a spanner on both terminals of the battery if it sparks, welds and makes you go blind a 1st degree burns- then the battery is ok:doh: :angel: :cool2: :smokin: :flame:
 
whats wrong with wanting to make my own its cost me 4 quid for the bits from maplin. and it will look factory fitted and also when i look at it i can think i made that i can see what my batterys are doing when winching ect ect
 
Nothing wrong with that Distd5co, to be honest It's not a bad idea....But were just taking the pi$$...
I'm into electronics and radio and crap like that too.
 
distd5co said:
whats wrong with wanting to make my own its cost me 4 quid for the bits from maplin. and it will look factory fitted and also when i look at it i can think i made that i can see what my batterys are doing when winching ect ect
Click to expand...

I prefer to look at stuff like this and think "I made that" but each to their own, eh?

- Dominic's Journal - Finished the first picket gate

:kettlepot:(Yes, I'm trying to build a web-site and am disguising my blog as a "journal". I promise not to make any more references to people liking to make electrical thingies that they can buy on ebay, as geeks).
 
somtimes i think that people like domellis ect. carnt understand that making something thats not offted see as a factory look battery monitor, So the people who build challenge trucks are geeks because they build something for a purpose? The like the fact that their tray back is different to the next mans. shall we make a poll saying dont make owt buy it so its like everyone elses. tbh I think thats a little boaring and small minded. fair enuf you brought a landrover why no personalise it? And for the people how do like designing and making things carry on. you know when your at a landy show looking round and you see summat thats different induvidual. Its more than likely someone has gone to the trouble time and thought of doing it. Thats why people like things because their not the same as everyone else??? Any truth in that?
 
You're not getting me, I think. I do enjoy making stuff (I've bought a Landy!) and understand the satis in getting stuff to work (recently solved an overheating problem by cleaning out all the cooling pipes and replacing the head gasket), I just don't understand making a complicated LED thingy when you can buy a voltage meter of the shelf.
Like I say, each to their own!
As long as you're having fun, enjoying what you do and doing it with pride and passion KEEP ON KEEPING ON!
 
DomEllis said:
You're not getting me, I think. I do enjoy making stuff (I've bought a Landy!) and understand the satis in getting stuff to work (recently solved an overheating problem by cleaning out all the cooling pipes and replacing the head gasket), I just don't understand making a complicated LED thingy when you can buy a voltage meter of the shelf.
Like I say, each to their own!
As long as you're having fun, enjoying what you do and doing it with pride and passion KEEP ON KEEPING ON!
Click to expand...


There's only three componants and then only twisted together. It's not complicated I made one in two minutes as I already had the bits and it works not that i will use it though.
 
You must log in or register to reply here.

Similar threads

MJI
Disco 2 Battery voltage low in hawkeye
Replies
19
Views
866
sierrafery
sierrafery
M
Relay R6 faulty
Replies
8
Views
508
gstuart
gstuart
B
Discovery 4 2015 auxiliary battery Question
Replies
9
Views
595
Graculus
Graculus
S
2003 Overlander TD5 for sale (40k)
Replies
4
Views
1K
Schweate
S
moorsman61
Immobiliser problem
Replies
1
Views
264
discool
discool
Back
Top