Ball off my gear stick fell into gear box please help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Dazking

Member
Posts
14
Hi all can anyone please help I've had a problem with my gearstick being really loose so spoke to a few people and they told me it was the yoke so I ordered one it came today so I took on the task of changing it myself only to knock the ball off the end of the gearstick into the gearbox so hoping someone can tell me the easiest way of finding it or is it a case of taking it to the garage as I feel I should have done that in the first place now thanks in advance daz
 
Hi thanks for your reply it had no well hardly any yoke to remove as it was worn away so there was nothing holding the ball in place also the clip is missing in action so who knows where that has gone too
 
yokes the bit that is secured to selector shaft by a grub screw (5mm tool needed)bush holds ball with a snap ring ,you need to find both if possible
 
Ah right no then all I was changing was the plastic piece the ball sits in as it was none existent how deep can the ball go as you said use an extendable magnet but obviously the gears are in the way thanks again
 
Sorry to sound stupid but will magnet go straight to the point or is there a few places if may have gone thanks again Daz
 
Thanks for your help mate but all sounds a bit like I'm gonna break something else and looking at that gearbox it's not just gonna be a straight forward job just out of interest do you have any pictures of how the bits fit on the yoke please thanks again Daz
 
Back
Top