P38A Back for more

killerhaggis said:

Hi all,
Sold my p38 4.0 se two years ago and regretted ever since, I have just bought a reasonably clean 2000 4.6 Vogue, it comes with a lot of history and bills/receipts going back to new, mostly everything works as it should ( for now anyway) , it has a slight sagging headliner in boot area which i will tackle when the weather improves, the lcd HEVAC screen needs replacing (also read that it could be the connector ribbon on the back causing the issue), the tyres have a few months left in them but i will replace with Pirelli Scorpions, I also will change discs/pads(which i bought for my last p38 but never fitted.) Anyway I look forward to getting my hands dirty again .
Derrick

Click to expand...

RangeRoller dt said:

Welcome back to the fold

You want one of these
https://www.ebay.co.uk/itm/Car-LCD-...-for-Land-Rover-Range-Rover-P38-/192147273233

Change any bulbs in there that need doing same time ,and get contact cleaner on the spinny adjuster

Click to expand...

wammers said:

If it can be seen but has missing pixels it needs a ribbon. If it is just very dim and there are no pixels missing, it maybe just the back light bulb blown.

Click to expand...

killerhaggis said:

Thats what I was thinking, has some pixels missing so will change the ribbon

Click to expand...

Grrrrrr said:

@martyuk has played quite a lot with HEVAC displays. There's something in his online shop here: http://p38webshop.co.uk/index.php?route=product/category&path=75

Marty also posted this in the Technical Section on part numbers which is rather useful as it is a bit of a minefield.

https://www.landyzone.co.uk/land-rover/hevac-identification-matched-to-vin-numbers.317526/

Click to expand...

Turktowner said:

Greetings from down the road.
Love the avatar too. #jinglebombs.

Click to expand...

killerhaggis said:

Thank you

Click to expand...