axle removal and swap

bustersbus · Apr 11, 2008

defenderdavie said:
great pics buster ahm a bit more confident aboot mine noo ive got a picture guide
jist one thing though aboot tools how many beers did it require
looking forward to seeing yer pics o the back
im doing mine about a week after yer pics go up

So when are ye doin' yours Davie?

bustersbus · Jun 19, 2008

It's bin a while since the back axle went in but just got round to sortin' out these pics. After the donor axle came out....

it was time for a clean. Got the degreaser and me pressure washer out and gave it a bit of a blast...

Once it had dried off ah got stuck into it with awire brush, angle grinder, more wire brushes on the drill and some sand paper...

then it was time for the primer...

and paint....

wasn't too sure what ah was goin' to do with the ends, but decided to keep them instead of replacin' them, came up ok in the end...

and this is the axle dryin' in the sun after paintin' the ends...

just a couple of pics of the axle that ah was swappin' it for...

Almost ready to go in....

Ah decided that ah would do the brake lines while ah was at it as well.....

and this is the 'new' axle finally in...

landy10 · Jun 19, 2008

No matter what you do you always manage to get a can of krony in the pic!

And a few in yersell

Madcowz · Jun 19, 2008

Excellent thread with nice big easy to see pictures and description.

If only the Haynes manual was printed like this I wouldn't spend half my life looking at tiny B&W pictures wondering what the hell it is meant to be.

Thanks for doing this for the benefit of others.

mad

bustersbus · Jun 20, 2008

landy10 said:
No matter what you do you always manage to get a can of krony in the pic!

Ye've got tae watch them buggers! They always jump out when ah'm tryin' tae take a photie!!!

And a few in yersell

Ohhhhh Aye

landy10 · Jun 20, 2008

My wife has me movin park benches and alsorts of different things so she dont get them in the picture!
You just dont care enough thas all

bustersbus · Jun 20, 2008

Madcowz said:
Excellent thread with nice big easy to see pictures and description.

If only the Haynes manual was printed like this I wouldn't spend half my life looking at tiny B&W pictures wondering what the hell it is meant to be.

Thanks for doing this for the benefit of others.

mad

Cheers me dear

Aye, haynes is a pain in the erse 'specially when they stick picks of different things in when all ye want is a piccy of the thing ye're workin' on!!

Ye're welcome

bustersbus · Jun 20, 2008

landy10 said:
You just dont care enough thas all

Ah know

The piccies ain't goin' intae a weddin' album tho'

landy10 · Jun 20, 2008

naw, there goin on landyzone though much more important, dont want people thinkin they gotta drink krony to work on their landys this lot are bad enough sober!!!!

axle removal and swap

bustersbus

Well-Known Member

bustersbus

Well-Known Member

landy10

New Member

Madcowz

New Member

bustersbus

Well-Known Member

landy10

New Member

bustersbus

Well-Known Member

bustersbus

Well-Known Member

landy10

New Member

Similar threads