Hd1966
Member
- Posts
- 77
- Location
- South wales
hi ,I've got 90 style breathers on my series 3 axles , but the front pipe has gone walkies, what's the correct route for the pipe , thanks
Axle breathers
- Thread starter Hd1966
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,073
- Location
- west wales coast
There is no " correct " route as such because series landy's were not fitted with extended breathers from new.
On my series 3 I have run the pipe across to the spring and then used plastic ties along the spring back to the hanger. From there up the inside of the chassis leg up into engine bay Has stayed put many years.
On my series 3 I have run the pipe across to the spring and then used plastic ties along the spring back to the hanger. From there up the inside of the chassis leg up into engine bay Has stayed put many years.
Hd1966
Member
- Posts
- 77
- Location
- South wales
Thanks
