Auxiliary belt

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
F

freelandertd4bmw

Member
Posts
29
Today we changed the crank pull and bolt. We then went to put on a new dayco belt off Ebay. We pulled the tensioner back using the right spanner etc and also we put the belt on the right way looked at diagrams off here and in the Haynes manual. But the belt would not go on the last pully, idler one..it was as if it was 1 inch to short. We then went and got another belt from part shop and again this one was also as if it was 1 inch to short. The tensioner was pulling back ok and we pulled it back as far as it would allow. We are lost on how to get this belt on as it is too short by about 1 inch. I would of thought there should be some slack and it not be tight as when tensioner is released it be even tighter??

Can I get a bigger belt ?
 
freelandertd4bmw said:
Today we changed the crank pull and bolt. We then went to put on a new dayco belt off Ebay. We pulled the tensioner back using the right spanner etc and also we put the belt on the right way looked at diagrams off here and in the Haynes manual. But the belt would not go on the last pully, idler one..it was as if it was 1 inch to short. We then went and got another belt from part shop and again this one was also as if it was 1 inch to short. The tensioner was pulling back ok and we pulled it back as far as it would allow. We are lost on how to get this belt on as it is too short by about 1 inch. I would of thought there should be some slack and it not be tight as when tensioner is released it be even tighter??

Can I get a bigger belt ?
Click to expand...
They are really tight to get back on, so best way is to route the belt so it's going over the crank pulley last, then get someone to turn the pulley with a socket and it will wind it' self on.
9CT16c8l.jpg
1

1yfOXVAl.jpg
2

rB4Iuy3l.jpg
3
 
But it is 1 inch to short to get on. Won't it be then mega tight when on? And will it even wind itself on that way as can only get it on of crank as it won't fit as it looks short but compared it belt that came off and is same size. But was wondering if crank pull could be bigger although it was one for the car.
 
freelandertd4bmw said:
But it is 1 inch to short to get on. Won't it be then mega tight when on? And will it even wind itself on that way as can only get it on of crank as it won't fit as it looks short but compared it belt that came off and is same size. But was wondering if crank pull could be bigger although it was one for the car.
Click to expand...
It will wind on don't worry unless Dayco belts run smaller which i doubt, i prefer gates myself.
www.ebay.co.uk

GATES MICRO-V MULTI-RIBBED ALTERNATOR AUXILIARY DRIVE BELT 5PK2030 | eBay

PART NUMBER 5PK2030. ORIGINAL GATES BELT. Gates is the OEM supplier to virtually all car manufactures worldwide. When fitting, follow vehicle manufactures installation instructions. SINGLE SIDED. Don`t know if it will fit?.
www.ebay.co.uk

www.ebay.co.uk

Gates V-Ribbed Belts Fits Land Rover Freelander Rover 75 - 5PK2030 | eBay

Gates V-Ribbed Belts 5PK2030. We are an authorised distributor for Gates parts. Equivalent to Part Numbers: BMW: 11282247191, 11287787368, Land Rover: PQS1013…. If you order before 12PM we'll dispatch same day from our UK warehouse. For guaranteed next day delivery please select this option at...
www.ebay.co.uk

Compressor belt.
www.ebay.co.uk

Gates V-Ribbed Belts Fits Freelander 75 Impreza Legacy MG ZT - 5PK870 | eBay

Gates V-Ribbed Belts 5PK870. We are an authorised distributor for Gates parts. Equivalent to Part Numbers: Chevrolet: 96144932, 96352456, Daewoo: 95990232, 9…. If you order before 12PM we'll dispatch same day from our UK warehouse. For guaranteed next day delivery please select this option at...
www.ebay.co.uk

LdGERSOl.jpg
1
 
We used to have the same problem, until I bought a set of long "aviation" spanners. Problem was we could not move the tensioner through its full range with standard spanner due to the angled head.

These work every time and are easier to pull with one arm !!

1713613431109.png
 
Last edited:
Thanks I got belt on but now I've another problem. It all ran OK but then belt flew off and I checked and alternator was on an angle.

I've a 2005 landrover freelander 1 td4 bmw engine and the bottom bolt on the alternator has snapped from where it bolts into not the bit on the alternator the bit the bolt goes into. If I'm asking sense. Is this a bracket attached to engine or is it all part of the engine?

Will the alternator be OK with top bolt and the bolt at the back? Or will I need all 3 bolts fitted and if so how do I fix this
 
Am hoping this is the part needed number 11
 

Attachments

  • Screenshot_20240424_190716_Chrome.jpg
    Screenshot_20240424_190716_Chrome.jpg
    682.9 KB · Views: 73
  • Screenshot_20240424_202131_eBay.jpg
    Screenshot_20240424_202131_eBay.jpg
    373.7 KB · Views: 88
You must log in or register to reply here.

Similar threads

F
Belt slap
Replies
5
Views
707
freelance
freelance
terr
Td4 aux belt
Replies
5
Views
634
terr
terr
anubis757
Freelander 1 Houston we have a problem!!!!
2
Replies
30
Views
1K
andyfreelandy
andyfreelandy
Lex Myster
Freelander 2 TD4 Timing Belt
Replies
4
Views
773
Stanleysteamer
Stanleysteamer
B
FL2 - Alternator belt gone but engine stopped?
Replies
16
Views
1K
pwood999
pwood999
Back
Top