auf_wiedersehen_pet's shopping list

Here's a list of a few bits that I'm after - Updated 26th June 2015.

• Coin tray.
• Scorpion Racing Safari snorkel grille in stainless.
• OME +5" Dampers.

Fingers crossed.

I have some gutter trim that I took off my 3 dr 200 tdi. I know I split a bit of it but I think most of it is ok. I will go look for it tomorrow evening..

JonnyP said:

I have some gutter trim that I took off my 3 dr 200 tdi. I know I split a bit of it but I think most of it is ok. I will go look for it tomorrow evening..

Click to expand...

Cheers mate.

If you could let me know how much is left between the splits - then I'll work out what it can be sawn down to. I'd need the overlapping connector clip things too.

Speak soon.

auf_wiedersehen_pet said:

Cheers mate.

If you could let me know how much is left between the splits - then I'll work out what it can be sawn down to. I'd need the overlapping connector clip things too.

Speak soon.

Click to expand...

I will get a pic of what I got, you are welcome to it. I decided not to put it back on.
Pm me if I forget n miss this fred. I got a memory like a sieve.

JonnyP said:

I will get a pic of what I got, you are welcome to it. I decided not to put it back on.
Pm me if I forget n miss this fred. I got a memory like a sieve.

Click to expand...

To do it in three sections, A pillar to B, clip, B to C, clip, C to D, clip measures up like this.

AB 570 mm
BC 700 mm
CD 820 mm

Unsuprisingly, the old trim was so brittle, the best I could manage was two good pieces AB & CD. Therefore, I need 1x 570mm, 2x 700mm and 1x 820mm.

JonnyP - PM coming your way.

auf_wiedersehen_pet said:

To do it in three sections, A pillar to B, clip, B to C, clip, C to D, clip measures up like this.

AB 570 mm
BC 700 mm
CD 820 mm

Unsuprisingly, the old trim was so brittle, the best I could manage was two good pieces AB & CD. Therefore, I need 1x 570mm, 2x 700mm and 1x 820mm.

JonnyP - PM coming your way.

Click to expand...

Sorry chap, will def look tomorrow..

I may have a few pairs of Sumo bars knocking around in the shed, is the front one to suit a drop arm with a ball joint or the later type that uses 2 x trackrod ends and a drop arm with a hole in it?

Boris113 said:

I may have a few pairs of Sumo bars knocking around in the shed, is the front one to suit a drop arm with a ball joint or the later type that uses 2 x trackrod ends and a drop arm with a hole in it?

Click to expand...

I have the later type with 2 trackrods and need a disco droparm with the hole in it if you have one in ya shed???

redhand said:

I have the later type with 2 trackrods and need a disco droparm with the hole in it if you have one in ya shed???

Click to expand...

I don't have one. Sorry.

This was all I could find.. The strip is just under 1 meter long and in pretty good nick. I got the front n back bits and 6 joiners.
I thought I had more strips so will have another look, but I might of chucked them..?
The other curved bit I seem to remember was a joiner on the back, but its a bit broken. One other bit had a split, but I think the rest is ok..

JonnyP said:

This was all I could find.. The strip is just under 1 meter long and in pretty good nick. I got the front n back bits and 6 joiners.
I thought I had more strips so will have another look, but I might of chucked them..?
The other curved bit I seem to remember was a joiner on the back, but its a bit broken. One other bit had a split, but I think the rest is ok..

Click to expand...

Cheers mate. I'm happy to take that off your hands. Let me know how much you want and how much for postage. I'm off on holiday on Monday - just in case it goes quiet at this end.

:beer2::beer2::beer2::beer2::beer2:
:5bparty::5bparty:

auf_wiedersehen_pet said:

Cheers mate. I'm happy to take that off your hands. Let me know how much you want and how much for postage. I'm off on holiday on Monday - just in case it goes quiet at this end.

:beer2::beer2::beer2::beer2::beer2:
:5bparty::5bparty:

Click to expand...

I don't want anything for it chap.. Just pm me your address and I will get it off to you next week somewhen :0)

Bump - 1st post updated with a new shopping list.

I'm pretty sure I've got all the grommets on the V8 I'm breaking, along with the heated screen connector.

Will have a looksie

Aydena said:

I'm pretty sure I've got all the grommets on the V8 I'm breaking, along with the heated screen connector.

Will have a looksie

Click to expand...

Brilliant - and close enough to drop by too.

Bump

See 1st post for details.

Well

A mate has 4x azimuths on his hilux, and he is about to get a disco 5.

He is currently waiting for it from LR but it is anytime now kinda thing.

I don't know if he is transferring his lighting onto the disco or starting again with new stuff.

The gear will defo come off the hilux.

So, that's just a mention before you buy new ones because I'm damn sure you won't find a set just kicking about anywhere else!!

Hi bud I have a few solenoids knocking about from doors, mine ate from a lhd though, drivers door so still nearside to you fellas, if you want em you can have em, but to avoid stupid post costs I'm in the UK in about 7 weeks, do you want em, free like. Pick up in Manchester or posted from Manchester at your cost

Mr Noisy said:

So, that's just a mention before you buy new ones because I'm damn sure you won't find a set just kicking about anywhere else!!

Click to expand...

I'm interested if the price is right.

DiscoPol said:

Pick up in Manchester or posted from Manchester at your cost

Click to expand...

That's a great offer - thanks. Cheap postage from Manchester sounds good. Let me know how much it is and I'll sort you out.

auf_wiedersehen_pet said:

............


That's a great offer - thanks. Cheap postage from Manchester sounds good. Let me know how much it is and I'll sort you out.

Click to expand...

drop me a pm nearer the time with an address matey and i will remember to chuck em in the car for the drive over