Disco 2 ATC UNIT

Andy Warren

Well-Known Member

Full Member

Posts

2,061

Location

Hertfordshire

• Oct 1, 2023

• #1

Hi all, I picked up a 'wood effect' ATC unit today & just wondered if they are all the same ?
The one I got today, see pic is p/no. JFC102350 & the original one is in JFC000170. I know both these no's have superceded so, providing the 'new' one is OK will it work?
One for @sierrafery maybe .
Many thanks in advance.

 

Attachments

• 
  20220221_122214.jpg

  246.8 KB · Views: 86
• 
  20231001_173848.jpg

  176.9 KB · Views: 87

sierrafery

Well-Known Member

Posts

17,911

Location

Arad/Romania

• Oct 1, 2023

• #2

Hi, if it's faultless it should work IMO but i cant 100% confirm from own experience

 

Andy Warren

Well-Known Member

Full Member

Posts

2,061

Location

Hertfordshire

• Oct 1, 2023

• #3

sierrafery said:

Hi, if it's faultless it should work IMO but i cant 100% confirm from own experience

Click to expand...

Thanks for that, I did plug it in about 30 mins ago (didn't run the engine) & the blower,temp scale & flap operations are ok but the illumination in the switches didn't work so I just swapped the bulbs from my original unit to fix that problem. I'll take it for a spin tomorrow & check the heater/air con side.

 

Andy Warren

Well-Known Member

Full Member

Posts

2,061

Location

Hertfordshire

• Oct 4, 2023

• #4

sierrafery said:

Hi, if it's faultless it should work IMO but i cant 100% confirm from own experience

Click to expand...

Just to let you know the 'later' unit works perfectly.