- Posts
- 58,170
- Location
- Preston Lancs.
Photo of bumper mod. http://www.landyzone.co.uk/lz/attachment.php?attachmentid=43202&stc=1&d=1363710376
As promised.
- Thread starter wammers
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
Underpigeon ?? 
- Posts
- 58,170
- Location
- Preston Lancs.
JohnnyCrash
New Member
- Posts
- 1,917
Sorry but that is a bodge in my eyes
- Posts
- 58,170
- Location
- Preston Lancs.
JohnnyCrash
New Member
- Posts
- 1,917
An effective bodge though.
ok - so it does the job and from the drivers seat you don't have to look at it
Datatek
Well-Known Member
- Posts
- 46,197
- Location
- Near Poitiers SW France
Looks OK to me, but not something i would do to fit what I consider to be pretty poor fog lights.
gfromleeds
Well-Known Member
- Posts
- 2,234
- Location
- leeds. westyorkshire, uk
- Posts
- 58,170
- Location
- Preston Lancs.
ok - so it does the job and from the drivers seat you don't have to look at it
There are untidy bits that i would have done maybe a little better. But it looks quite good from a normal viewing point. The only time you would notice the dicky bits is if you were being run over. Or someone took a low level photo of it.
P38guy
New Member
- Posts
- 308
JohnnyCrash
New Member
- Posts
- 1,917
There are untidy bits that i would have done maybe a little better. But it looks quite good from a normal viewing point. The only time you would notice the dicky bits is if you were being run over. Or someone took a low level photo of it.
Hahaha
Still prefer my solution
Similar threads
