Archies
Active Member
- Posts
- 178
- Location
- Stoke on Trent
Still haven`t sorted this flamin ABS out.
Ive replaced wheel bearings
Removed and cleaned kingpin and ABS sensor
Had sensor tested
Had relays tested
Checked if theres any play in the wheel incase i needed to remove any kingpin shims.
Drivers side wheel skids when braking but ABS works on other wheels
Reset memory using blink test, (finally got blink test working.)
When im braking when i come to a stop i can hear a faint whirring noise coming from front driverside wheel, where the ABS is having a problem
Pads are new and it pulls to the left slightly when braking.
Any idea on what else i should check or does anyone know what the faint whirring noise could be incase thats affecting the ABS.
Thanks for your help.
Archie
My neighbour has just had his meter on the sensor, it doesnt display anything, tried the passenger side and that come back with 9.7 ohms, tried drivers side again and displayed nothing, so i think the sensors knackered after all.
Ive replaced wheel bearings
Removed and cleaned kingpin and ABS sensor
Had sensor tested
Had relays tested
Checked if theres any play in the wheel incase i needed to remove any kingpin shims.
Drivers side wheel skids when braking but ABS works on other wheels
Reset memory using blink test, (finally got blink test working.)
When im braking when i come to a stop i can hear a faint whirring noise coming from front driverside wheel, where the ABS is having a problem
Pads are new and it pulls to the left slightly when braking.
Any idea on what else i should check or does anyone know what the faint whirring noise could be incase thats affecting the ABS.
Thanks for your help.
Archie
My neighbour has just had his meter on the sensor, it doesnt display anything, tried the passenger side and that come back with 9.7 ohms, tried drivers side again and displayed nothing, so i think the sensors knackered after all.
Last edited:
