P38dseGAV
Active Member
- Posts
- 570
- Location
- Abbey Hay manchester
could do with a hand on fitting my diff anyone up for the job 
anyone fancey help fitting my front diff
- Thread starter P38dseGAV
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
gettin a bit dark now
oil dripper
Well-Known Member
- Posts
- 5,659
- Location
- Here i think
you,d get the carpet dirty anyroads
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
P38dseGAV
Active Member
- Posts
- 570
- Location
- Abbey Hay manchester
i have a well lit unit
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
that place is just too tidy mate, wheres the unfinished projects and piles of crap yer saving just incase
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
no chance of getting me in there, the fecking heaters not even pointing in the direction of the car, and wheres the ramp?????
everlatesparky
Active Member
- Posts
- 811
- Location
- Sheffield
Been there done that!!
Took me and a m8 from the GTO club about 5hrs with the odd tea stop on his new block paved drive using just a 3ton jack and stands.
Worse bit was getting the hubs to move......'kin big 'ammer and lots of WD helped but did do a bit of damage.
Tips........
Gently pull the ABS sensors out of there holders about 5-8 mm..not all the way out just out of the way.
Put suspension on to wading height then open a door or the boot otherwise the diff hits the gearbox and is a real pig to remove(dont ask me how i know)
Let any helpers catch the diff for you
Change the half shaft seals while your doing the diff.
Failing that ....................let Gav do it!!!:behindsofa:
Took me and a m8 from the GTO club about 5hrs with the odd tea stop on his new block paved drive using just a 3ton jack and stands.
Worse bit was getting the hubs to move......'kin big 'ammer and lots of WD helped but did do a bit of damage.
Tips........
Gently pull the ABS sensors out of there holders about 5-8 mm..not all the way out just out of the way.
Put suspension on to wading height then open a door or the boot otherwise the diff hits the gearbox and is a real pig to remove(dont ask me how i know)
Let any helpers catch the diff for you
Change the half shaft seals while your doing the diff.
Failing that ....................let Gav do it!!!:behindsofa:
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
cheeky fecker, i wa gonna help you but you fecked off werkin!!
notice how i wrote that in pikey for ya!!!
notice how i wrote that in pikey for ya!!!
P38dseGAV
Active Member
- Posts
- 570
- Location
- Abbey Hay manchester
job done but opps on the abs o well its a menace
Similar threads
