1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Another tdv6 crank

Discussion in 'TDV6/8' started by Jeremy Vinnicombe, Nov 22, 2018.

< Previous Thread | Next Thread >
  1. Jeremy Vinnicombe

    Jeremy Vinnicombe New Member

    Joined:
    Jan 31, 2016
    Posts:
    2
    Likes Received:
    0
    Location:
    Lutterworth
    Hey all, can anyone tell me if the tdv6 3.0 crank fits the 2.7? Mines spun and currently rebuilding it. Unfortunately it had a rebuild 18 months ago at £3600 but after me stripping it down it was clearly micky mouse and the gang who done it. My crank is salvageable but only at. 75 oversize and i never go further than. 50. So looking for cranks but the 3.0 seams to be cheaper? Alternatively anyone fitted a 3.0 twin engine in a 2. 7s place?
     
  2. freelance

    freelance Well-Known Member

    Joined:
    Mar 5, 2009
    Posts:
    6,833
    Likes Received:
    2,601
    Location:
    essex and beyond
    Are the block journals and caps still in spec size wise ? I would have thought if shells have spun twice there could be an issue?
    Can’t answer your question with conviction, someone will be along shortly I expect
     
    8ha likes this.
< Previous Thread | Next Thread >