Another cruise control

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

smurphy

Active Member
Posts
410
Location
The Potteries (Land of the Gods)
I've just brought another 96 disco V8i. I want to swap the cruise control from my other one to this. Now I've found the wire to plug the compressor into and the switch too. The wire I can't find is the one to the steering wheel. Now should it be there as every other one is? Or do I need to wire it in myself? I have searched though old posts but can't find anything. Regards Steve.
 
If you have the same model, it 'should' be the same as far as connectors go, but you might just be unlucky and find that there is an extension cable missing or something similar.

The vacuum pump on my D2 has its own little loom, but the wiring on the dash etc is probably different to the older ones.

I'll have a quick look through the Rave CD, but don't hold your breath...;)

Peter
 
listerdiesel said:
If you have the same model, it 'should' be the same as far as connectors go, but you might just be unlucky and find that there is an extension cable missing or something similar.

The vacuum pump on my D2 has its own little loom, but the wiring on the dash etc is probably different to the older ones.

I'll have a quick look through the Rave CD, but don't hold your breath...;)

Peter
Click to expand...

Thanks peter:) In fact I'm going to download Rave to my new laptop as you just reminded me.
 
You must log in or register to reply here.

Similar threads

yfo866
Early 3.5 Range Rover cruise control?
Replies
9
Views
452
hef19898
hef19898
D
Disco 2 Auto reverse lights
2
Replies
21
Views
2K
Davidmac
D
K
Disco 2 Disco 2 Cruise Control Not Working
Replies
13
Views
783
DanClarke
DanClarke
D
Cruise control mind of its own
2
Replies
33
Views
850
Graculus
Graculus
Rustynail
Disco 1 D1 Steering wheel horn tab
Replies
8
Views
631
discool
discool
Back
Top