Angel eyes?
- Thread starter Ene
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
thequeenscheese
Well-Known Member
- Posts
- 1,487
- Location
- Greater Manchester
Looked myself in the past and havnt found any, was the same for my old spitfire ive neverreally understood why so many makes are overlooked by these styles..
But idont think it would be bard to retro fit a kit or some of the audi type strings with a heat gun to seperate the lens from the backing..
But idont think it would be bard to retro fit a kit or some of the audi type strings with a heat gun to seperate the lens from the backing..
illy
Active Member
- Posts
- 117
- Location
- Staffordshire
Buy Cheap Car Decorations Led Strips at Dealextreme - DX
Page 17 are some BMW ones, but there must be something there to improvise
with.
illy
Page 17 are some BMW ones, but there must be something there to improvise
with.
illy
Tannaton
Active Member
- Posts
- 288
- Location
- Beverley, East Yorkshire, UK
Off topic but you can get them for the Spitfire, David Manners does a 7" halogen kit with angel eyes (meant for a classic Mini but will fit Spitfire). If you want to be even cooler there is a 7" LED headlight conversation which I have seen on Defenders (incl. Lindsay Porters) which should fit the Spitfire. They're the other side of £600 tho....
thequeenscheese
Well-Known Member
- Posts
- 1,487
- Location
- Greater Manchester
Tbey did t when i had mine but i didntknow the mjni headligbts did either missed that.. Their was a cyrstal mod lamp that looked good bjt was expensive..
Epicuser
Ex Freelander Owner
- Posts
- 2,393
- Location
- North East Surrey
Do they exist for the freelander 1? And if so where does one get a pair
Cheers
This what you are after?
http://www.hids4u.co.uk/bi-xenon-projector-lens-hid-conversion-kit-with-colour-changer.html
TD4_4x4
Active Member
- Posts
- 283
- Location
- North Yorkshire, UK
Nice find epicuser.
One problem would be fitting those Xenons and getting them level.
I think to disassemble the lamp unit you have to put them in the oven (taking them out the car first) to get the glue loose, then you can pick them apart to get inside the glass.
Probably going to be next to impossible though to fix them securely, at the right angle?
A shame as done right, they could look neat.
One problem would be fitting those Xenons and getting them level.
I think to disassemble the lamp unit you have to put them in the oven (taking them out the car first) to get the glue loose, then you can pick them apart to get inside the glass.
Probably going to be next to impossible though to fix them securely, at the right angle?
A shame as done right, they could look neat.
Tannaton
Active Member
- Posts
- 288
- Location
- Beverley, East Yorkshire, UK
Given that headlights are going for about a tenner a piece on e-bay it might be worth buying a set to be the sacrificial proto-types....
DaddyCoolJordan
New Member
- Posts
- 71
- Location
- West Yorkshire
I think it would look awesome but its alot of money if it doesn't work right even on a sacrificial pair
Epicuser
Ex Freelander Owner
- Posts
- 2,393
- Location
- North East Surrey
And what about headlight washers....
You have the motor in the lights to (do it your) self controlled from the dashboard.
I can't fit these to mine as they only work with H4 bulbs, so are only suitable for pre facelift vehicles.
I am sure I will fit a set of the normal HIDS4U 55w ultimate HID's soon, with the anti dazzle coating. Called H7R.
Nodge68
Well-Known Member
- Posts
- 32,504
- Location
- Near Newquay
From my interpretation of the rules. HID lights need to be adjustable, not necessarily self leveling.
Epicuser
Ex Freelander Owner
- Posts
- 2,393
- Location
- North East Surrey
I think they come with all the instructions you need. HIDS4U are very helpful and will generally talk you through any problems.
