Anderson socket waterproofing

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
O

olliebradley

New Member
Posts
55
I would like to fit an Anderson socket to my 90 but it would most likely go under the bonnet so is there a way of water proofing it say like a cap or sumthing??


1986 90" NATO Green full tilt
 
Get the boot and dust cover kit to go on em. The red dust cover is made of rubber and waterproof. The black cover is made of plastic and isn't.

I remove the leads and regrease the connections on mine with copper grease about once every 6 months. It's mounted on my front bumper and is now on its 3rd landy. That makes the connector about 6 or 7 years old. I have nor rubber boot on mine and only a plastic cap. If you don't grease em up regularly though they will corrode. It tends to be the little metal spring clip/retainer in the plastic housing that rots away first.
 
Brilliant find on eBay, on my shopping list for good.. Just need to find the time to fit it...


1986 90" NATO Green full tilt
 
You must log in or register to reply here.

Similar threads

L
Rewire 3rd brake light
Replies
4
Views
391
logis
L
SNOman
How to: de-ASBO my old V8
2 3
Replies
44
Views
3K
6pot
6pot
adyw
Rear suspension Sag
Replies
11
Views
741
adyw
adyw
P
Is it always like this ?
Replies
7
Views
423
Kev12
Kev12
tweedandbriar
Defender 110 Light Bar Wiring Question
Replies
19
Views
767
tweedandbriar
tweedandbriar
Back
Top