steely dan
Active Member
- Posts
- 195
- Location
- County Kerry Ireland
Our late '99 Freelander anniversary model came with a boot mounted amp. and twin speaker set up (Park Lane Landrover , London ). It has Harmon Kardon badges on the front tweeter covers but no manufacturers name on the amp .I removed it after the boot well flooded and removed the terminal connector at the same time as the spades were corroded. Problem I have now is that I cannot find the wiring diagram for the terminal block:doh:
Does anyone have the same set up fitted that could tell me the orientation of the wiring.
Also the 12v supply is not available on what I think is the supply line ( heavier gauge red wire) the Haynes wiring diagram shows no ref. to such a system and I've checked all fuses and found none blown, where does the supply come from ?
I guess it will be spurred off a handy source and a lower rated in line fuse fitted .
Anyway, I have to fit a new head unit as the original LR single unit is US ( no bass ) and it would be nice to recommission the amp at the same time.
Does anyone have the same set up fitted that could tell me the orientation of the wiring.
Also the 12v supply is not available on what I think is the supply line ( heavier gauge red wire) the Haynes wiring diagram shows no ref. to such a system and I've checked all fuses and found none blown, where does the supply come from ?
I guess it will be spurred off a handy source and a lower rated in line fuse fitted .
Anyway, I have to fit a new head unit as the original LR single unit is US ( no bass ) and it would be nice to recommission the amp at the same time.