Alignment and Tracking Question

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ccoaton

New Member
Posts
51
Location
Northern Ireland
Hello...
Today i got a digital wheel alignment and tracking done,.garrage said that was it set perfect...But after taking it fir a drive the vehicle still pulls to the left slightly...

Jobs done.....

Lower Ball Joints
Upper Track rods and Rod ends...
Drop links bars..
Digital Tracking..

Any ideas as to why i would still get a pull to the left would be great..

Anti roll bar maybe..dunno guessing really:)
 
Hi, I understand from what you say that all four wheels have now been checked with digital alignment and adjustments carried out.

If the tyres have been wearing inside or outside edges, this can sometimes cause slight pulling following realignment. One answer is to swap the wheels side to side. Good luck..
 
Sorry Forgot to mention..

4 New tyres a few weeks ago..

But the Caliper thing could be possible...
Although i Did them both with new pads and Cleaned and greased them up...
The passenger one does let the odd squeak out of it now and again..
Worth a look...

Thanks people:)
 
Sorry Forgot to mention..

4 New tyres a few weeks ago..

But the Caliper thing could be possible...
Although i Did them both with new pads and Cleaned and greased them up...
The passenger one does let the odd squeak out of it now and again..
Worth a look...

Thanks people:)

Use Wurth anti squek and spray them at the back of the pads.Works on my ride.
 
Back
Top