chiefweasel
Member
- Posts
- 63
- Location
- Epping
Boringly, the alarm / immobiliser / keyfob I got with my ill fated 110 CSW doesn't work. Perhaps slightly more interesting though is that none of the door switches which turn on the interior lights seem to work (i.e. when the doors open the interior light doesn't come on), even though both interior lights work fine.
I've had a look at the wiring diagram for the interior lights (Haynes manual diagram 8, page 13.30) and it flows through the alarm, so both faults are likely to be connected. All of the fuses check out fine, and just in case I replaced the battery in the key fob. I've also made sure both interior lights are set to the right setting, and that the wires are actually attached to the door switches.
Before I get busy with the mallet and chisel has anyone come across this before? I couldn't find the exact same thing in any of the existing threads. Haynes manual doesn't mention the alarm /immobiliser at all.
Ta very much.
I've had a look at the wiring diagram for the interior lights (Haynes manual diagram 8, page 13.30) and it flows through the alarm, so both faults are likely to be connected. All of the fuses check out fine, and just in case I replaced the battery in the key fob. I've also made sure both interior lights are set to the right setting, and that the wires are actually attached to the door switches.
Before I get busy with the mallet and chisel has anyone come across this before? I couldn't find the exact same thing in any of the existing threads. Haynes manual doesn't mention the alarm /immobiliser at all.
Ta very much.
