Well I'm lost so I'm hoping I can shed some light on my issue here.
I've recently had 4 new bags put on my p38 2 arnott on the front and 2 dunlop on the back as the rear arnotts I had put on both failed by the top clip with the bag parting causing a major leak.
I got the car back today and when I turned it on it inflated to standard height with a solid light by the switch but outside it has seemed to inflate fine on the near side but the drivers side is way too low, I measured this and the passenger side was 89cm from the floor to the wheel arch, however the drivers side was 84cm on both wheels.
Surely this cant be the bags as they are brand new and I'm thinking it just needs calibrating but I may be wrong. If so does anyone know someone that does calibration in yorkshire.
I've recently had 4 new bags put on my p38 2 arnott on the front and 2 dunlop on the back as the rear arnotts I had put on both failed by the top clip with the bag parting causing a major leak.
I got the car back today and when I turned it on it inflated to standard height with a solid light by the switch but outside it has seemed to inflate fine on the near side but the drivers side is way too low, I measured this and the passenger side was 89cm from the floor to the wheel arch, however the drivers side was 84cm on both wheels.
Surely this cant be the bags as they are brand new and I'm thinking it just needs calibrating but I may be wrong. If so does anyone know someone that does calibration in yorkshire.
sounds like the same problem you had.
