MartinRees
Member
- Posts
- 11
- Location
- Kent
Advice on bulkhead repair
- Thread starter MartinRees
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
![IMG_1290[1].JPG](/data/attachments/231/231528-aa0c7531812553805715c474266dd568.jpg)
![IMG_1291[1].JPG](/data/attachments/231/231529-f96501a1aa16246b328aa5d4ea27b02a.jpg)
![IMG_1292[1].JPG](/data/attachments/231/231530-9b1463606cb516e3665e9f33b8d2e23d.jpg)
![IMG_1293[1].JPG](/data/attachments/231/231531-f3e609b94df41996d8a097d49e6be26a.jpg)
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
Some of that just needs grinding back and treating then paint, and some needs cutting out and new metal welded in
tottot
Well-Known Member
- Posts
- 7,562
- Location
- west wales coast
Those area's above footwell are just single skin so cut out affected area and weld in new. Spot on door pillar may well be thin so treat the same way and after paint squirt anti rust inside pillar.
