Advice after engine change

Ive nearly finished my engine swap on my 97 4.6 but ive got a rogue coolant hose. i cant find a home for it anywhere. It comes from the bottom left hand side of the expansion bottle if your looking at it from the front of the car. It then goes down under the engine towards the n/s. I have no idea where it goes. Also can anyone give me any advise on bleeding it. I just started it today and it sounds great its only this hose stopping me now. Thanks in advance to any replys Jools

how big is the pipe, i dont remember one that goes under the engine!!

have a look in rave, it gives you a diagram of the coolant and coolant flow!

bleedin is usually best done by filling as much as it will take then running it to open the stat, topping up all the time and keeping expansion cap off.

they can be a bag to bleed!!

its about the size of a pencil. ive been old it should be running along the top of my engine to the hrottle body. any one got any pictures of from under the bonnet near the throttle body or the routing of the hoses that goes to it? I havent got a clue its been that long since i had the engine out.