Advice about re-coding.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Elle Hugs

Elle Hugs

Member
Posts
30
Location
Stevenage
Hi all
After an eventful engine swap the disco now runs, though a bit sluggish. I'm getting really conflicting info about having to re-code the different injectors to the ecu. Do I need a nanocom code reader to do this as I'm a tad confused? Some people are saying that it's not necessary to re-code but if it is does anyone know anywhere in the Cambs, Herts borders that can help please? Thanks in advance.
 
The codes "tweak" the injectors and balance them out a bit, it's desirable to do it if you have changes the injectors for different ones because that's how they were designed, but you shouldn't notice a huge difference if not done.
It's easy to do them with a nanocom and only takes a few minutes, I am sure some kind soul will help you with it possibly just for travel expenses.
 
Thank you, appreciate your answer, hows best to find someone please? I'm a bit new to the forum and not sure where I should post that. Thanks again.
 
But do you have, the code numbers ? If you dont you will have to expose the injectors to get them, then yes Nanocom and a few other decent machines can do this, Snap On being a popular one that most garages have ;)

Yes they will run without coding, but coding is doing the job properly, anything else is not ;)
 
So surely there is a local Garage near you that can enter them for you, Snap On, Autel, Bosch KTS and a few others are all professional "generic" (all marques) machines that garage Owners have and all of them can do Injector Coding, almost all Electronic Controlled Diesels since 2000 need that function. It won't take a decent Tech 15 minutes to do it ;)

Don't specifically need someone with Nanocom ;)
 
Dave2302 said:
So surely there is a local Garage near you that can enter them for you, Snap On, Autel, Bosch KTS and a few others are all professional "generic" (all marques) machines that garage Owners have and all of them can do Injector Coding, almost all Electronic Controlled Diesels since 2000 need that function. It won't take a decent Tech 15 minutes to do it ;)

Don't specifically need someone with Nanocom ;)
Click to expand...
Ok, thank you, I'll have a look was told it needed to be specific.
Appreciate your help.
 
Nope, Nanocom doesn't have the sole rights :D In fact the only thing my Snap On can't do that Nanocom can is Keys and Immobiliser Programming, but if I ever need a spare key there is a guy in Inverness with a proper Land RoverTest Book ;)

I have Snap On and Autel in my Garage business, (along with a lot of Dealer Level Kit), but yes Snap On and Autel can both do it ;) I'm almost certain that as they can so can Bosch KTS and also Autologic ;)
 
Dave2302 said:
Nope, Nanocom doesn't have the sole rights :D In fact the only thing my Snap On can't do that Nanocom can is Keys and Immobiliser Programming, but if I ever need a spare key there is a guy in Inverness with a proper Land RoverTest Book ;)

I have Snap On and Autel in my Garage business, (along with a lot of Dealer Level Kit), but yes Snap On and Autel can both do it ;) I'm almost certain that as they can so can Bosch KTS and also Autologic ;)
Click to expand...
Ok, brilliant thanks for all that info.
 
You must log in or register to reply here.

Similar threads

Elle Hugs
Advice on re-coding please.
Replies
8
Views
2K
Elle Hugs
Elle Hugs
Lej
Discovery 2 1999 key fob replacement + coding
Replies
12
Views
562
Stanleysteamer
Stanleysteamer
Elle Hugs
Disco 2 Injector coding… HELP
Replies
4
Views
958
Elle Hugs
Elle Hugs
V
P38a acting up
Replies
9
Views
840
Grrrrrr
Grrrrrr
S
D4 P006A00 Manifold Absolute pressure - air flow correlation - HELP!!
Replies
12
Views
1K
Stevie135
S
Back
Top