Disco 2 Injector coding… HELP
- Thread starter Elle Hugs
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dave2302
Active Member
- Posts
- 271
- Location
- NW Scotland
Hi, any decent (knowledgeable tech) in a local garage with Snap On Diag machine (Solus or better) will be able to do that for you, if you were nearer I'd do it for ya in 10 minutes flat 
You will need to have the Injector code numbers written down, which I'm not exactly certain on the TD5 motor, but are usually etched on the top of the Injectors, so a pita as TD5 Injectors are under Cam Cover
If you have the vehicle that the Engine came out of and it still has Battery and Motor ECU wired up it's easier to read 'em outta the Motor ECU
HTH
You will need to have the Injector code numbers written down, which I'm not exactly certain on the TD5 motor, but are usually etched on the top of the Injectors, so a pita as TD5 Injectors are under Cam Cover
If you have the vehicle that the Engine came out of and it still has Battery and Motor ECU wired up it's easier to read 'em outta the Motor ECU
HTH
- Posts
- 41,253
- Location
- East Dorset
Surely if they have the engine, they could remove the injectors and put them in the "new" engine in the exact same holes?!Hi, any decent (knowledgeable tech) in a local garage with Snap On Diag machine (Solus or better) will be able to do that for you, if you were nearer I'd do it for ya in 10 minutes flat
You will need to have the Injector code numbers written down, which I'm not exactly certain on the TD5 motor, but are usually etched on the top of the Injectors, so a pita as TD5 Injectors are under Cam Cover
If you have the vehicle that the Engine came out of and it still has Battery and Motor ECU wired up it's easier to read 'em outta the Motor ECU
HTH
I AM aware that some will find pulling the injectors not in their skills list.
Dave2302
Active Member
- Posts
- 271
- Location
- NW Scotland
Sure they could, (but maybe they were faulty or damaged, maybe they don't have them) I'd find it far easier to just re code 'em, either way, unless they have the ECU from the Donor, the Cam Cover at least has to come off
We were sold a dodgy engine by a company who won't reply to our messages so we've had to make good using the old engine as a donor and bought various new parts to go with it. The car is running and seems OK but we would be happier to get it coded correctly.
Thanks so.much for your comments, they're all really helpful as we are relatively new to all this.
Thanks so.much for your comments, they're all really helpful as we are relatively new to all this.
