andrian.ivanov
New Member
- Posts
- 1
- Location
- Bulgaria
Hello
Some one have service diagram about this. Need more information Cannot found for this car
Some one have service diagram about this. Need more information Cannot found for this car
Freelander 1 Adjust washing jets on screen
- Thread starter andrian.ivanov
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Shimsteriom
Master Procrastinator
- Posts
- 41,906
- Location
- Over Here
Welcome 
Nodge68
Well-Known Member
- Posts
- 32,504
- Location
- Near Newquay
On adjusting the washer jets?
It's easy.
Just use a correct fitting pin or micro-drill shank, pushed into the nozzle. Then move the nozzle (it's a movable ball and socket) until it sprays screen wash at the correct part of the screen.
They don't go out of adjustment, so incorrect spray angles is down to a partial blockage in the nozzle. This can be cleaned with a micro-drill of the correct size, or a piece of correct gauge wire.
It's easy.
Just use a correct fitting pin or micro-drill shank, pushed into the nozzle. Then move the nozzle (it's a movable ball and socket) until it sprays screen wash at the correct part of the screen.
They don't go out of adjustment, so incorrect spray angles is down to a partial blockage in the nozzle. This can be cleaned with a micro-drill of the correct size, or a piece of correct gauge wire.
Similar threads
