Disco 1 Adding ARB/Carling switches

Has anyone herein ever taken out their D1 ashtray and/or coin slot and fitted ARB/Carling style switches in their place?

Sorry - should have searched the forum first. Will look through the archives.

can be done......... needs a bit of dremmeling though.

Dremmeling....

To dick about with a little grinder which was a pressie or an impulse buy for a silly length or time when a file would of done it in 20 seconds.

I call mine a die grinder

Dream Mellons

Spell checker says this is correct when I refer to the smal grinder machine, at last it is right!

I had one of these 3d printed to fit in place of the coin tray.

It's made for carling switches.

http://www.thingiverse.com/thing:1008821

https://www.3dhubs.com/



Foz

fozt said:

I had one of these 3d printed to fit in place of the coin tray.

It's made for carling switches.

http://www.thingiverse.com/thing:1008821

https://www.3dhubs.com/

Foz

Click to expand...

That's neat - I guess your D1 is LHD from the pictures....

minesthechevy said:

That's neat - I guess your D1 is LHD from the pictures....

Click to expand...

Hi mate - not my pictures. They are just the pictures the guy took that created the 3d model

Mines a RHD

you can download that model and use the 3dhubs website to find someone local to you to print and ship the part to you.

I think it cost me about a tenner.

Can just about see mine in this photo, it only has 1 switch in it.



Foz

I designed a bunch of panel replacements for this. They are here. http://www.shapeways.com/shops/fhsolutions

I put the coin holder on on thingiverse.

Hijacking a bit here but has anyone found anywhere in the UK that does the carling switch with a fan on it.Plenty in Australia but havnt found any in UK yet .