ACE removal advice

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Sorry to jump on this thread, but while on the subject I have a td5 converted to springs, I used Hawkeye to reprogram to springs but the light is still on (orange) any one had this before?
Kev

Two completely different subjects mate, they're talking about ACE your talking about SLS (self leveling suspension}

You have ACE amber light on?
 
Ahh, sorry about that, yes I have a light with an image of a car with a curved arrow on each side. So I believe that's the ACE light.
Kev
 
Last edited:
Ahh, sorry about that, yes I have a light with an image of a car with a curved arrow on each side.

that would be ace light ,orange means theres an issue but bars are locked like normal roll bars ,red theres an issue but bars arent locked so car can roll more easily
 
Ahh, sorry about that, yes I have a light with an image of a car with a curved arrow on each side. So I believe that's the ACE light.
Kev

It will be of no relevance to converting to coils unless something has been disturbed, or most probably just be a coincidence.

Best get it on the diagnostic that does ACE.
 
Code 0023 Invalid pressure signal received

I think its going to be the pressure transducer, I'll have a look tomorrow to make sure its not just a broken wire. Thanks for the help.
Kev
 
Ace pump removed. Just feels like my old 300 tdi to be fair. Good bye ace. Anyone after any bits. As all is coming off. Only pipes no good
 
Back
Top