diver
Active Member
- Posts
- 398
- Location
- Sunbury on thames
After several unsuccesful attempts at sorting out a leaking ACE pipe on the valve block on my 2000 TD5 I have just had another go at it. Cut the pipe this time and joined it with a compression joint. Got the O rungs nicely seated etc. Put it all back together and its now flooding out. Pull the pipe off again and its sheared off on the ridge where the collet goes. So, I need a new pipe. Just want the section to go into the valve block since I'm joining it.
Can find part no RQB000380 as the rear section of the feed from the pump. Seems to be the cheapest option.
Does anyone know if this is definitely the right end of the pipe? I don't want to end up with the pump end.
Love the system but I'd like to get hold of the halfwit at Landrover who didn't seem to know about standard hydraulic hoses. Talk about re-inventing the wheel.
Can find part no RQB000380 as the rear section of the feed from the pump. Seems to be the cheapest option.
Does anyone know if this is definitely the right end of the pipe? I don't want to end up with the pump end.
Love the system but I'd like to get hold of the halfwit at Landrover who didn't seem to know about standard hydraulic hoses. Talk about re-inventing the wheel.