ACE help needed

Driving home from work yesterday on the motorway, when I drove round a tight bend the yellow ACE warning lamp lit and remained on till ignition switched off.

On the way to work this morning same thing at the same bend going the opposite way.

Again the warning came on tonight on returning home at the same corner.

Connected Hawkeye and found fault code 37 within the ACE section with the wording 'Demand pressure calculated by the control method is suspect'

Not had a chance to check anything as yet as it is dark and also working tomorrow, wont have a chance to check till Sunday at the earliest.

Other than taking another route home has anyone experienced this fault or any ideas where to start.

By the magnanimity of mr. Urban Panzer u can see how to fix that www.discovery2.co.uk / ACE amber light - Pressure Transducer cos IMO that's your problem

sierrafery said:

By the magnanimity of mr. Urban Panzer u can see how to fix that www.discovery2.co.uk / ACE amber light - Pressure Transducer cos IMO that's your problem

Click to expand...

New Delphi transducer - £65

Fitted in 5 mins

Codes read and cleared via Hawkeye and system tested all in order.

Thanks for your post

ive had red lights and buzzer just ignored it as its usually when ive dropped some thing heavy in the boot doesnt behave any different when driving ? still handles the same

had enough 2 said:

ive had red lights and buzzer just ignored it as its usually when ive dropped some thing heavy in the boot doesnt behave any different when driving ? still handles the same

Click to expand...

I've made a note to myself never to buy anything that you offer for sale.

alas i have something for sale suits all disco 2 ace equipped vehicles replaces the rotten steel pipe efforts that landrover fitted with proper fittings i posted it last year on here buy one or pay tons for springs or original crap....lol the heavy stuff i mentioned is a full pa system for the band and i believe it traps a wire under the floor ???? maybe wrong