sparky steve
Active Member
- Posts
- 226
- Location
- chester
yep tried that, amber warning light on all the time.
if I removed the ACE system and fitted normal ARB's
how would the slabs cope with this W/light wise?
Ace ecu
- Thread starter sparky steve
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
yep tried that, amber warning light on all the time.
if I removed the ACE system and fitted normal ARB's
how would the slabs cope with this W/light wise?
sparky steve
Active Member
- Posts
- 226
- Location
- chester
sierrafery
Well-Known Member
- Posts
- 18,215
- Location
- Arad/Romania
the warning can be managed with T4 but maybe with the new nanocom EVO aswell(some owner might enlight u).... on a second thought, yes, as long as it's not set for "non ACE" by unplugging the ECU u disturb the SLABS ECU and the ECM too cos they miss the inputs from it and trigger the warnings
... are u sure that the ACE warning was still on when u disconnected the ECU(maybe u missed it because of the others) cos according to the diagram the warning lamp gets feed directly from pin 36 of the connector
... are u sure that the ACE warning was still on when u disconnected the ECU(maybe u missed it because of the others) cos according to the diagram the warning lamp gets feed directly from pin 36 of the connectorSimilar threads
