ACE BLOCK

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
martin c brown

martin c brown

Member
Posts
78
Location
Plymouth
HI
I am having trouble with the ace block,to start with I have replaced the rear ace pipes as the old ones were bad an very rusty. Now I have come to the block I have removed the old seals only to find that the ports are very corroded, putting in new seals with all the corrosion will only end in leaking pipes I'm sure So where do I go from here ? I have read about removing the ace systems altogether but as the car came with it I am inclined to keeping it original as the ace is very good when working well,
My question is can the block be repaired or is there a modification that I can get done to it.
Any help welcome
 
Given the cost of the modulator I don't reckon you would want to replace it with a new one! Best option might be to find someone who has disabled their ACE system and see if their modulator is usable.
Given the state of my pipes, the mod is probably no better than yours!
:)
 
Get a spare off Ebay, dismantle (one valve is left hand thread)

Get it converted to use hydraulics fittings
 
Thank you all very much for suggestions
Thanks for the link Jamiegreen i will order one i have gone to for with the rear end build now
Thanks again
 
You must log in or register to reply here.

Similar threads

G
Anti Roll Bar disconnect
Replies
16
Views
716
Gingerbread
G
MAF Diver
Disco 2 Is my ACE leaking fluid at the actuator arm? New bushing?
Replies
9
Views
627
MJI
MJI
R
ACE wiring problems ?
Replies
2
Views
519
Rimas
R
K
Disco 2 ACE Fault
Replies
7
Views
653
kingy08
K
A
D2 ACE & steering fluid problem
2
Replies
25
Views
2K
sierrafery
sierrafery
Back
Top