ABS on a disco I

couple of questions:

does the wiring loom have a connection for an ABS module?

can the ABS system from another disco I or from an RRC be retrofitted to
mine (200 type)?

can it be done without incurring costs equivalent to the national debt?

Believe it depands on what level wiring loom you have to be honest!
low/mid/high. I would imagine you haven't got the correct loom so if your
getting the ABS unit from another disco i would suggest get all the wiring
too.
You will need the wheel sensors and the motion triggering device thats on
each wheel
the pipe work will be a head ache too.

What eactly will you be able to get from the other disco?


MArk
"Austin Shackles" <[email protected]> wrote in message
news:[email protected]...
>
> couple of questions:
>
> does the wiring loom have a connection for an ABS module?
>
> can the ABS system from another disco I or from an RRC be retrofitted to
> mine (200 type)?
>
> can it be done without incurring costs equivalent to the national debt?
>

On or around Thu, 30 Sep 2004 18:43:49 +0000 (UTC), "Jinx"
<[email protected]> enlightened us thusly:

>Believe it depands on what level wiring loom you have to be honest!
>low/mid/high. I would imagine you haven't got the correct loom so if your
>getting the ABS unit from another disco i would suggest get all the wiring
>too.
>You will need the wheel sensors and the motion triggering device thats on
>each wheel
>the pipe work will be a head ache too.
>
>What eactly will you be able to get from the other disco?

I haven't another disco, as such. 'twas a more general enquiry about the
difficulty of doing it. dunno which loom TBH, I rather doubt if it has the
wiring though, and in fact it probably ain't worth the effort/cost.

If you want a idea wirng wise take a look at your haynes manual, very
intense wiring going on. I was lucky to find a nice disco with ABS on at the
time, i have never had to use it yet but when the time comes to stop the
hefty + 2 ton i'm sure it will pay for its self.

Mark

"Jinx" <[email protected]> wrote in message
news:[email protected]...
> Believe it depands on what level wiring loom you have to be honest!
> low/mid/high. I would imagine you haven't got the correct loom so if your
> getting the ABS unit from another disco i would suggest get all the wiring
> too.
> You will need the wheel sensors and the motion triggering device thats on
> each wheel
> the pipe work will be a head ache too.
>
> What eactly will you be able to get from the other disco?
>
>
> MArk
> "Austin Shackles" <[email protected]> wrote in message
> news:[email protected]...
>>
>> couple of questions:
>>
>> does the wiring loom have a connection for an ABS module?
>>
>> can the ABS system from another disco I or from an RRC be retrofitted to
>> mine (200 type)?
>>
>> can it be done without incurring costs equivalent to the national debt?
>>
>
>