chabrolly
Active Member
- Posts
- 432
- Location
- LEBANON - mediterranean sea
hello
is it possible to fix the abs modulator in a p38 1996 4.6?
is it possible to fix the abs modulator in a p38 1996 4.6?
abs modulator p38 1996
- Thread starter chabrolly
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Depending on what is wrong with it almost anything can be fixed IF you have the correct parts and know what you are doing. Personally i would replace it with a known good unit. What are the symptoms?
chabrolly
Active Member
- Posts
- 432
- Location
- LEBANON - mediterranean sea
it doesn't work.. after i knock on it, it works for a while, but no more again.. and i had the three start up lights always on, with no brakes.
thanks for replying
thanks for replying
chabrolly
Active Member
- Posts
- 432
- Location
- LEBANON - mediterranean sea
it's a possibility
brianp38dse
Well-Known Member
- Posts
- 19,645
- Location
- heathrow
You should be able to here and feel the abs pump run on start up or if you use the brakes if all is ok it should run after6 peddle pushes.
- Posts
- 58,170
- Location
- Preston Lancs.
First thing you need to do is check that pump is running. Black relay in fuse box could be faulty.. If it is running. Second thing you need to do is time how long it runs for before TC lamp goes off after first start in the morning. Third thing you need to do is count how many applications of the brake you get before pump restarts after TC lamp has gone out. Then get back on and report the results.
chabrolly
Active Member
- Posts
- 432
- Location
- LEBANON - mediterranean sea
couldn't hear anything ..
chabrolly
Active Member
- Posts
- 432
- Location
- LEBANON - mediterranean sea
i appreciate your reply .. thank you.
