ABS blink switch

Hi everybody,


I've got an intermittent three amigos on my 2003 Disco 2 v8.

I looked through the http://www.meritorwabco.com/MeritorWABCO_document/mm39.pdf schematic for the modulator from Meritor Wabco.

They have a blink switch option for the unit and I was wondering if anybody has tried to fit one to the disco? It seems to just run the ABS light to ground ?

Dave

Your best be is to get it plugged into a dedicated tester, Nanocom, Hawkeye etc.

Agree with you on that one, but buying a nanocom in the new year.

If you fitted it on the dash, the code would flash without getting the kit out, for what seems like a minor job.

It's essentially the obd paper clip trick!