A Frame Bushes

Afternoon all,

There always been a 'clunk' from my diso since I've owned it and I decided to search the forum to see what it may be. The A frame bushes seem most likely from what I've found but I wondered how I can check to make sure its really them, also I've seen Bustersbus post on how to renew'em but wondered if anyone else has done'em and if they're really a driveway DIY jobbie ( not being funny buster but you've clearly had a bundle more mechanical experience than me ) ... any help appreciated..also I guess polyurethane is the way to go..cheers.

its just nuts and bolts just take it apart wack out the bushes.Press in some newones with a socket the same size as the outer ring on bush(be precise) oh and pop some copperslip on two surfaces.
Put back together.....

use oem bushes as polybushes are too hard.

Cheers Beast... so I dont need a press or anything ?...also do you know how I can checl to see if its deffo them ?

for a few pointers take alook
http://www.landyzone.co.uk/lz/f41/upper-link-frame-bushes-renewal-65602.html

if you get a clunk from the back end as you take up drive or change gear its your axle being pushed back,
an ya bushes are fooked.