A Frame Bushes

aston108 · May 10, 2009

Afternoon all,

There always been a 'clunk' from my diso since I've owned it and I decided to search the forum to see what it may be. The A frame bushes seem most likely from what I've found but I wondered how I can check to make sure its really them, also I've seen Bustersbus post on how to renew'em but wondered if anyone else has done'em and if they're really a driveway DIY jobbie ( not being funny buster but you've clearly had a bundle more mechanical experience than me ) ... any help appreciated..also I guess polyurethane is the way to go..cheers.

Beast o Bodmin · May 10, 2009

its just nuts and bolts just take it apart wack out the bushes.Press in some newones with a socket the same size as the outer ring on bush(be precise) oh and pop some copperslip on two surfaces.
Put back together.....

Beast o Bodmin · May 10, 2009

use oem bushes as polybushes are too hard.

aston108 · May 10, 2009

Cheers Beast... so I dont need a press or anything ?...also do you know how I can checl to see if its deffo them ?

oil dripper · May 10, 2009

for a few pointers take alook

http://www.landyzone.co.uk/lz/f41/upper-link-frame-bushes-renewal-65602.html

nickh75 · May 11, 2009

if you get a clunk from the back end as you take up drive or change gear its your axle being pushed back,
an ya bushes are fooked.

A Frame Bushes

aston108

Active Member

Beast o Bodmin

Banned

Beast o Bodmin

Banned

aston108

Active Member

oil dripper

Well-Known Member

nickh75

Well-Known Member

Similar threads