A bar fitting

Landy in surgey, so can't play with it So easy question for a Sunday;

Got an A bar and spots delivered. No fitting instructions, for A bar, but not rocket science right?

Two bolts on bumper, three holes on base of bar; so, have to drill a new hole in the bumber? Correct?

Will exisiting bolts be long enough? or off i go to B&Q? No new bolts or extra bolt with bar, so its causing me to self doubt

Ummm, I guess I'll just shut up and get on with it then

Stuballsed said:

Landy in surgey, so can't play with it So easy question for a Sunday;

Got an A bar and spots delivered. No fitting instructions, for A bar, but not rocket science right?

Two bolts on bumper, three holes on base of bar; so, have to drill a new hole in the bumber? Correct?

Will exisiting bolts be long enough? or off i go to B&Q? No new bolts or extra bolt with bar, so its causing me to self doubt

Click to expand...

Yes, existing bolts long enough.
Drill two new holes
Locate all bolts (slim triple jointed arm for new front nuts)
tighten bolts in new holes first (mine through top plate of bumper only)

then back two bolts

Stuballsed said:

Landy in surgey, so can't play with it So easy question for a Sunday;

Got an A bar and spots delivered. No fitting instructions, for A bar, but not rocket science right?

Two bolts on bumper, three holes on base of bar; so, have to drill a new hole in the bumber? Correct?

Will exisiting bolts be long enough? or off i go to B&Q? No new bolts or extra bolt with bar, so its causing me to self doubt

Click to expand...

I fitted one last year.... existing bolts will be fine but may not come off easy and may even shear off. Don't go to B and Q as they are not simple nuts and bolts.... order a set online. The extra bolt is not special and can be a short one with a nylock nut or plain washer from B and Q if needs must.
You may need to put a couple of washers as shims between the new hole and the A bar so it is flush when tightened up.
Check out this link, my tail of woe... http://www.landyzone.co.uk/lz/f7/fitting-bar-bumper-removal-problem-80518.html

Bought a scabby a bar off fleabay £12
Couple of holes to weld up, all paint sanded and emery clothed off.
£20 powder coating.
Fitted this afternoon.
Looks mint now.

Need help never fitted an a bar before and spotlights before would anyone be kind enough to give me some instruction

Charles1234 said:

Need help never fitted an a bar before and spotlights before would anyone be kind enough to give me some instruction

Click to expand...

You may want to try the introduce your self section before you start asking questions

aaronmorris said:

You may want to try the introduce your self section before you start asking questions

Click to expand...

wot he said ^^^^^^^^^^^^^^^^^^^^^^

It's an 05 landy 90 with out air con no idea what I'm doing really need to drill two new holes and bought kit for wiring two spot lights offbolt on bits

:fish:

Any help please

Sheesh some people don't listen.

1. Go introduce yourself in the introduction section.
2. Start your own NEW thread in the appropriate section rather than hijacking someone else's thread.

flat said:

Sheesh some people don't listen.

1. Go introduce yourself in the introduction section.
2. Start your own NEW thread in the appropriate section rather than hijacking someone else's thread.

Click to expand...

+1 I told him that with his first post. Which he has obviously ignored and since asked the same question another 2 times on the same thread.
'Kin nobber

aaronmorris said:

'Kin nobber

Click to expand...

agreed!