A bar fitting

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Stuballsed

Stuballsed

New Member
Posts
1,093
Location
Oxfordshire
Landy in surgey, so can't play with it:mad: So easy question for a Sunday;

Got an A bar and spots delivered. No fitting instructions, for A bar, but not rocket science right:)?

Two bolts on bumper, three holes on base of bar; so, have to drill a new hole in the bumber? Correct?

Will exisiting bolts be long enough? or off i go to B&Q? No new bolts or extra bolt with bar, so its causing me to self doubt:eek:
 
Stuballsed said:
Landy in surgey, so can't play with it:mad: So easy question for a Sunday;

Got an A bar and spots delivered. No fitting instructions, for A bar, but not rocket science right:)?

Two bolts on bumper, three holes on base of bar; so, have to drill a new hole in the bumber? Correct?

Will exisiting bolts be long enough? or off i go to B&Q? No new bolts or extra bolt with bar, so its causing me to self doubt:eek:
Click to expand...

Yes, existing bolts long enough.
Drill two new holes
Locate all bolts (slim triple jointed arm for new front nuts)
tighten bolts in new holes first (mine through top plate of bumper only)

then back two bolts
 
Stuballsed said:
Landy in surgey, so can't play with it:mad: So easy question for a Sunday;

Got an A bar and spots delivered. No fitting instructions, for A bar, but not rocket science right:)?

Two bolts on bumper, three holes on base of bar; so, have to drill a new hole in the bumber? Correct?

Will exisiting bolts be long enough? or off i go to B&Q? No new bolts or extra bolt with bar, so its causing me to self doubt:eek:
Click to expand...

I fitted one last year.... existing bolts will be fine but may not come off easy and may even shear off. Don't go to B and Q as they are not simple nuts and bolts.... order a set online. The extra bolt is not special and can be a short one with a nylock nut or plain washer from B and Q if needs must.
You may need to put a couple of washers as shims between the new hole and the A bar so it is flush when tightened up.
Check out this link, my tail of woe... http://www.landyzone.co.uk/lz/f7/fitting-bar-bumper-removal-problem-80518.html
 
Bought a scabby a bar off fleabay £12
Couple of holes to weld up, all paint sanded and emery clothed off.
£20 powder coating.
Fitted this afternoon.
Looks mint now.
 
It's an 05 landy 90 with out air con no idea what I'm doing really need to drill two new holes and bought kit for wiring two spot lights offbolt on bits
 
Sheesh some people don't listen.

1. Go introduce yourself in the introduction section.
2. Start your own NEW thread in the appropriate section rather than hijacking someone else's thread.
 
flat said:
Sheesh some people don't listen.

1. Go introduce yourself in the introduction section.
2. Start your own NEW thread in the appropriate section rather than hijacking someone else's thread.
Click to expand...

+1 I told him that with his first post. Which he has obviously ignored and since asked the same question another 2 times on the same thread. :confused:
'Kin nobber
 
You must log in or register to reply here.

Similar threads

dag019
Fitting a Husky Winch
Replies
8
Views
764
dag019
dag019
dag019
Station wagon second row seatbelt fitting
Replies
6
Views
361
dag019
dag019
S
richards chassis & pre-drilled holes for steps
Replies
1
Views
316
hughdavies
H
ChrisBduck
3.6L Land rover 90
Replies
2
Views
983
ChrisBduck
ChrisBduck
W
Soft A-bar fitting kit
Replies
1
Views
624
dag019
dag019
Back
Top