pauls440
New Member
- Posts
- 117
- Location
- west malling kent
hi all i have just changed my rubber donut , but now the vibration is just as bad . should i take it back and turn the prop ??
96 300tdi
- Thread starter pauls440
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
defcrazy
Active Member
- Posts
- 477
- Location
- Trinidad & Tobago
you could have another problem ,a bad u joint ,bent prop shaft , worn bushes any of these things could have caused the rubber "dounut" to go bad in the first place
pauls440
New Member
- Posts
- 117
- Location
- west malling kent
U joints all ok the old donut was crack
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
try it with it off in difflock then try the same with front if no better
pauls440
New Member
- Posts
- 117
- Location
- west malling kent
ok will do but why would it get worse buy fitting a new one???
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
does diff flange have freeplay/endfloat ,have you bolted it in right,prop slide seized ,hand brake grabbing,front ? often worth trying with one prop off as it isolates the end to look at
pauls440
New Member
- Posts
- 117
- Location
- west malling kent
ok will try tomorrow
