90 Roof
- Thread starter Rallenz1a
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Britcyclerider
Well-Known Member
- Posts
- 209
- Location
- Dorset, UK
If you need a 90 roof to compare against, my 90 is currently stripped down pending a rebuild and I am just outside Wimborne.
General consensus seems to be that I have the roof too far forward so I have moved it back and taken more photos, if you look at the one near the rear of the door I think we can agree that it would be a problem going any further back as the metal strip the door rubber would sit on would then anag three side panels, also the front mounting holes are no where near lining up any more
Thanks, what year if yours ?
I was just gonna say, thats where its being raised by the looks of it, just behind the door aperture/ B pillar..
Britcyclerider
Well-Known Member
- Posts
- 209
- Location
- Dorset, UK
Mine is a 1989. Are you a fellow classic Hymer owner? Is that a B544 in the background?
By the b pillar is defiantly where it needs to be lower but nothing at all is touching in that area, it's a problem at the front that's causing it, difficult to convey the issue with photos
I am as of last year, even joined the club !
I think the 89 one would be the same as the one in trying to fit, I would like to find a original 85 one to check
Actually, thinking about your offer, it might be useful to be able to measure the windscreen surround etc to see if that may be the issue, maybe later ones were i little lower ?. if you want to text me your number ill call you , mine is (deleted as suggested, ill find the pm option in a bit)
Last edited:
- Posts
- 11,020
- Location
- North of the Wall
It's never a good idea to post your personal details on a personal forum, mate. Better to send a personal message(PM) for that.
Last edited:
Noted, must try harder to play with technology
- Posts
- 11,020
- Location
- North of the Wall
Best go back to the post, click the edit button and delete it. (your mobile number that is) Send him a PM, he'll get an email to tell him you've sent a personal message via LandyZone
Last edited:
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
Has the screen srung forward since you removed the roof? Is the snorkle pulling it forward? If you can tighten down the screen bolts, that would bring the top back and down. When i refitted my roof, the flange along the door opening section of the roof that carries the door rubber sits inside the flange of the b pillar.
Good point maybe remove snorkel loosen and swing windscreen forward fit roof to back and sides and see where windscreen sits when offers back up...
Ill check that later, I dont think the snorkel is pulling on it as it just enters the wing through a "southdown" moulding which is not currently fixed to anything so the only mount is on the windscreen, ill give the screen a push though, see if it moves although the door gap looks right ish given that my hinges are quite worn.
I might try that later, im running out of ideas to be honest even had a few friends round now for second opinions but that only resulted in more people scratching their heads !! wish i'd kept the old roof for reference
Thanks for the lesson, i have edited the message but my number still shows where there has been a specific reply to that message, does that need the "replyer" to edit or delete ?
