marshy714
Active Member
- Posts
- 214
- Location
- chelmsford
Hi all, I'm currently rebuilding my 300tdi I was wondering if anyone knows what size bolts/ lengths etc everything seems to be 10 or 13 mm nuts and bolts.
90 rebuild zinc plated bolts
- Thread starter marshy714
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
chris07
Active Member
- Posts
- 413
- Location
- musselburgh the honest toun
think you will find that there all imperil sizes
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
metric
kes86
Active Member
- Posts
- 775
- Location
- Isle of Man
My 300tdi appears to be almost all metric.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
a 8mm bolt has 13 head if std head or 10mm if flange head
a 10mm bolt has a 17mm head if std or 13mmm if flange headed
depends there a few lengths and a few bolts to list
marshy714
Active Member
- Posts
- 214
- Location
- chelmsford
Guess I'll just buy a multi pack or something with an assortment and just use what ever fits! I've had to cut off or put a groove in a lot of them to get them undone! The lower down u get where all the crap gets up under neath the worse the bolts seem to get!
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
id buy a bag of m6 x 20mm ,m8 x 25mm ,m10 x 30 and buy the others as and when by part number ,a lot of bolts bar bodywork arent necessarily std bolts 8.8 but 10.9 or 12.9
