90 Prop Shaft UJs

dave-disco · Jun 30, 2009

I've got a nice clonk every time I change gear, so I'm going to start attacking the UJs on the prop shafts. Anyone got any good advice? I'm going to get the GKN UJs from Cheviot 4x4.

Ta

Pikey · Jun 30, 2009

get 2 sockets one big enough to allow the spider to fit inside it the other just small enoughto fit inside the hole in the prop. and a big vice/G clamp or hammer.

Trewey · Jun 30, 2009

UJs don't clonk in my experience.
A Frame ball joints do though.

dave-disco · Jun 30, 2009

yeah it's when the clutch engages and the prop shafts first turn, it clonks as they take up the torque.

The Mad Hat Man · Jun 30, 2009

yu sure it aint the gbox-tbox gear - they are prone to wearing.

dave-disco · Jun 30, 2009

I thought I'd try the easy repair first!

dave-disco · Jun 30, 2009

or should I say the easier to get at repair!

bustersbus · Jun 30, 2009

Ere ye go

http://www.landyzone.co.uk/lz/f41/uj-renewal-59812.html

The Mad Hat Man · Jun 30, 2009

ffs Buster - yu holding hands now? yu will be volunteering to do it next

dave-disco · Jun 30, 2009

cheers for that info - top stuff

bustersbus · Jul 1, 2009

The Mad Hat Man said:
ffs Buster - yu holding hands now? yu will be volunteering to do it next

Nah, just couldnae be ersed tellin' him tae 'do a search'!

90 Prop Shaft UJs

dave-disco

New Member

Pikey

Dummy Ejection Facilitator..

Trewey

Cockernee, Pasty munchin bastid.

dave-disco

New Member

The Mad Hat Man

Well-Known Member

dave-disco

New Member

dave-disco

New Member

bustersbus

Well-Known Member

The Mad Hat Man

Well-Known Member

dave-disco

New Member

bustersbus

Well-Known Member

Similar threads