3D printing ??
- Thread starter marksman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 5,695
- Location
- North Manchester
Quite a few threads already on here about 3D printing. Have you done a search?
- Posts
- 5,695
- Location
- North Manchester
Have you already designed the pieces ? in which case you can send the files to 3D printing companies for quotes.
Marshall8hp
Well-Known Member
- Posts
- 297
- Location
- Sydney
I got hold of a file for the dash mounted cup holder for a P38 and had it printed by a friend. It came up well.
I think getting it done one off by a commercial company would be expensive though. Admittedly they have different kit, but my friend’s 3D printer took 30 hours to do the job.
I think getting it done one off by a commercial company would be expensive though. Admittedly they have different kit, but my friend’s 3D printer took 30 hours to do the job.
- Posts
- 5,695
- Location
- North Manchester
I find larger objects with a minimum of around 5mm wall thickness are ok, anything thinner has very little strength if printed on a domestic type printer. IMO there are expensive printers that use a different printing process that would be fine but as you say are very costly to use.
Enuff
Well-Known Member
- Posts
- 967
- Location
- This side of there..
1st thing I would make are light grills/protector/cages..call them what you will, bloody expensive.
Its tricky to understand what the ask is ?
Are you asking for
- 3D Print
- 3D Design and Print
- 3D Scan and Print
The second takes more effort and depends what the item is.
The third is hardest but do-able with £££ or ingenuity and again depends on the item.
Happy to help if you want to try something out.
Last edited:
- Posts
- 18,963
- Location
- Buckinghamshire, UK. ('95 DT)
Little plastic clips should be easy enough and ideal for home printers. One of my faves is to print the clips which keep bags closed like a packet of crisps or something.
You could spend weeks tweaking it to get it right. I see there is an ashtray 3d Print but its about 1cm thick and takes 32 hours to print... I mean its an ashtray it just doesn't need to be like that. To get it right it needs some good thinking in the print config and the design. So many times its one or the other which makes it a fail.
You could spend weeks tweaking it to get it right. I see there is an ashtray 3d Print but its about 1cm thick and takes 32 hours to print... I mean its an ashtray it just doesn't need to be like that. To get it right it needs some good thinking in the print config and the design. So many times its one or the other which makes it a fail.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
- Posts
- 5,695
- Location
- North Manchester
IMO No 1 also depends on size of object given the printing bed is generally under 25cm square.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Did you manage to get the strength issue sorted mate,there could be a market for those trim clips.
If you dehumidify ABS before you print, you get more strength and better results in general. PLA is fine for mockups but has very limited life for finished parts.
- Posts
- 4,458
- Location
- Rotherham
Bit like bolting the stable door after the horse has leftWhat's the point of having clips to keep empty crisp packets closed?
- Posts
- 5,695
- Location
- North Manchester
- Posts
- 3,271
- Location
- Near Heathrow.
If anyone manages to print the clips in Dopey's post, I need some as well.
No I gave up in the end, It's hard to fine ppl with a printer in the first place, there are people that do it as a business, but they charge a lot of ££Did you manage to get the strength issue sorted mate,there could be a market for those trim clips.
